Are You Smarter Than a Student Driver?
Quiz completed!
Here are your results...
🥁You're a star!
Well done!
Good effort!
Not too bad!
Better luck next time!
You scored
out of
Question 1
What Does A Red Octagon-Shaped Sign Mean?
Question 1
What Is The Speed Limit In A Typical Residential Area?
Question 1
What Must You Do At A Flashing Yellow Light?
Question 1
What Is The First Thing You Should Do When Entering Your Vehicle?
Question 1
What Does A Solid Yellow Line On Your Side Mean?
Question 1
What Should You Do If An Emergency Vehicle Is Approaching With Lights And Siren On?
Question 1
What Is The Legal Blood Alcohol Limit For Adult Drivers In Most States?
Question 1
What Does A Green Light Mean?
Question 1
When Is It Legal To Turn Right On A Red Light?
Question 1
What Is The Proper Hand Signal For A Left Turn?
Question 1
What Does A Yellow Diamond-Shaped Sign Typically Indicate?
Question 1
What Should You Do Before Changing Lanes?
Question 1
What Does A Double Solid Yellow Line Mean?
Question 1
Who Has The Right Of Way At A Four-Way Stop?
Question 1
What Does A Red “X” Over A Lane Indicate?
Question 1
What Should You Do If You Start To Hydroplane?
Question 1
What Does A Circular Yellow Railroad Sign Mean?
Question 1
What Is The Minimum Safe Following Distance In Good Conditions?
Question 1
What Does A Broken White Line Between Lanes Mean?
Question 1
What Should You Do If Your Car Begins To Skid?
Question 1
When Are Roads Most Slippery?
Question 1
What Does A White Rectangular Sign Usually Indicate?
Question 1
What Should You Do When Approaching A School Bus With Flashing Red Lights?
Question 1
What Should You Do Before Entering A Roundabout?
Question 1
What Is The Correct Hand Signal For A Right Turn?
Question 1
What Does It Mean If A Driver’s Arm Is Pointing Straight Down?
Question 1
Why Should You Check Behind Your Vehicle Before Backing Up?
Question 1
What Does A Triangle-Shaped Road Sign Mean?
Question 1
What Should You Do If You Miss Your Exit On The Highway?
Question 1
What Color Are Most Warning Signs On The Road?
Question 1
What’s The Legal Limit For Blood Alcohol Concentration (BAC) In Most U. S. States?
Question 1
Why Should You Keep A Safe Following Distance Behind Another Vehicle?
Question 1
What Is Hydroplaning?
Question 1
When Should You Dim Your High Beams At Night?
Question 1
What Does A Red Circle With A Diagonal Slash Mean?
Question 1
What’s The Purpose Of A Speed Bump?
Question 1
What Does A Diamond-Shaped Road Sign Indicate?
Question 1
Why Should You Avoid Driving With High Beams In Fog?
Question 1
What Does A Flashing Red Traffic Light Mean?
Question 1
When Approaching A Roundabout, You Should:
Question 1
What Does This Sign Indicate? (YIELD)
Question 1
Why Should You Check Your Blind Spots Before Changing Lanes?
Question 1
When Driving Behind A School Bus With Flashing Red Lights, You Must:
Question 1
What Does A Solid White Line On The Road Mean?
Question 1
How Far Ahead Should You Look While Driving?
Question 1
When Is It Legal To Pass Another Vehicle Using The Shoulder?
Question 1
What Should You Do If An Emergency Vehicle Approaches With Lights And Sirens?
Question 1
What’s The Meaning Of A Blue Road Sign?
Question 1
What Is The Safest Way To Brake On A Slippery Road?
Question 1
What Does A Green Arrow Traffic Signal Mean?
Question 1
What’s The First Thing You Should Do If Your Tire Blows Out?
Question 1
What Does A Green Arrow Traffic Light Mean?
Question 1
When Driving In Fog, What Lights Should You Use?
Question 1
What Does Yielding The Right Of Way Mean?
Question 1
What Is The 'Move Over' Law In Many States?
Question 1
When Should You Use Your Emergency Flashers?
Question 1
When Are You Allowed To Use A Center Left Turn Lane?
Question 1
What Should You Do If You Miss Your Exit?
Question 1
What Does A Chevron Sign Along A Curve Mean?
Question 1
What Is A Blind Spot?
Question 1
What Does A Flashing Red Light Mean?
Question 1
What Should You Do Before Entering A Curve?
Question 1
How Should You Position Your Hands On The Steering Wheel?
Question 1
What Should You Do If You Approach A Traffic Light That’s Not Working?
Question 1
What Color Are Warning Signs?
Question 1
What Is Tailgating?
Question 1
What Is The Purpose Of Road Shoulders?
Question 1
What Does A Yellow Traffic Light Mean?
Question 1
What’s The Purpose Of Rumble Strips On Highways?
Question 1
What’s The Purpose Of A Roundabout?
Question 1
When Should You Use Your High Beams?
Question 1
What’s The Correct Way To Handle A Skid?
Question 1
What Does A Broken Yellow Line On The Road Mean?
Question 1
What Type Of Sign Is A Stop Sign?
Question 1
Why Is It Dangerous To Drive Drowsy?
Question 1
What Does A Red Light Indicate?
Question 1
What Is A Safe Following Distance In Ideal Conditions?
Question 1
What’s The First Thing You Should Do Before Changing Lanes?
Question 1
What Is The Purpose Of A Median Strip On A Road?
Question 1
What’s The Proper Hand Position On A Steering Wheel Today?
Question 1
When Driving At Night, You Should:
Question 1
What Does It Mean If A Pedestrian Is In A Crosswalk?
Question 1
What Color Are Warning Signs Like 'Slippery When Wet' Or 'Curve Ahead'?
Question 1
What Should You Do When Driving In Foggy Conditions?
Question 1
Why Should You Use Your Turn Signals?
Question 1
When Parking Uphill With A Curb, Which Way Should You Turn Your Wheels?
Question 1
What Does A 'No U-Turn' Sign Indicate?
Question 1
What Does A Speed Limit Sign Indicate?
Question 1
Why Should You Avoid Sudden Movements On Icy Roads?
Question 1
What Is The Purpose Of A Stop Line At Intersections?
1
Do Not Enter
2
No Parking
3
Yield
4
Stop
Stop signs are always red and octagonal, signaling drivers to come to a complete halt before proceeding safely.
1
55 mph
2
25 mph
3
45 mph
4
35 mph
Residential speed limits are generally 25 mph to protect pedestrians, bicyclists, and children near homes and schools.
1
Speed up to clear the intersection
2
Come to a complete stop
3
Slow down and proceed with caution
4
Turn around
Flashing yellow lights warn of hazards or cross traffic, so drivers should slow down and proceed carefully.
1
Buckle your seatbelt
2
Adjust your seat and mirrors
3
Turn on the radio
4
Start the engine
Before driving, you should adjust your seat and mirrors to ensure comfort and full visibility around your vehicle.
1
Passing permitted
2
Shoulder zone
3
One-way traffic
4
No passing allowed
A solid yellow line on your side indicates that passing is not allowed due to limited visibility or oncoming traffic.
1
Stop in the middle of the road
2
Pull over to the right and stop
3
Keep driving normally
4
Speed up to get ahead
Drivers must move to the right and stop, allowing emergency vehicles to pass quickly and safely.
1
0.08%
2
0.05%
3
0.10%
4
0.02%
Most states set 0.08% as the legal limit for blood alcohol concentration in adult, non-commercial drivers.
1
Prepare to stop
2
Go if the intersection is clear
3
Turn only
4
Stop
A green light means you may proceed if the intersection is clear and it’s safe to go.
1
After stopping and if there’s no sign prohibiting it
2
Only if turning onto a one-way street
3
Always
4
Only during daylight hours
You can turn right on red after stopping, unless a posted sign prohibits the turn.
1
Right arm extended
2
Left arm extended straight out
3
Left arm bent upward
4
Left arm bent downward
Extending your left arm straight out signals a left turn when turn indicators aren't functioning or visible.
1
Warning
2
School zone
3
Rest area
4
Stop
Yellow diamond signs warn of potential hazards ahead like curves, animal crossings, or merging traffic situations.
1
Accelerate quickly
2
Check mirrors and blind spot
3
Wave to other drivers
4
Honk your horn
Checking mirrors and blind spots ensures no vehicle is beside you before you move into a new lane.
1
No passing in either direction
2
Passing allowed both ways
3
One-way traffic only
4
Only trucks may pass
Double solid yellow lines prohibit passing for both directions due to safety concerns or visibility issues.
1
The car turning left
2
The first vehicle to arrive
3
The car going fastest
4
The largest vehicle
At a four-way stop, the vehicle that arrives first goes first, maintaining orderly and fair traffic flow.
1
You may pass
2
Accelerate
3
Turn only
4
Do not drive in that lane
A red “X” means the lane is closed to traffic and you must safely merge into a permitted lane.
1
Swerve sharply
2
Ease off the gas and steer straight
3
Speed up
4
Brake hard
Easing off the gas while steering straight helps you regain traction without losing control of the vehicle.
1
Roadwork coming up
2
Railroad crossing ahead
3
Speed bump
4
Yield to trucks
A circular yellow sign with an “X” alerts you to slow down and look for an approaching train.
1
Five car lengths
2
Three seconds
3
One second
4
Ten seconds
A three-second gap allows enough time to react if the car ahead suddenly stops or slows down.
1
No passing
2
One-way road ends
3
Stop immediately
4
You may change lanes
Broken white lines between lanes mean traffic moves in the same direction and you can change lanes if safe.
1
Turn sharply away
2
Steer in the direction you want to go
3
Speed up quickly
4
Brake hard immediately
Turning in the direction you want the front wheels to go helps regain control and stop the skid safely.
1
Right after it starts to rain
2
On sunny days
3
In the middle of a snowstorm
4
At night
Oil and dust build up on dry roads and mix with the first rain, creating very slippery conditions initially.
1
Construction warning
2
Railroad crossing
3
Regulatory information
4
Hospital nearby
White rectangular signs display rules such as speed limits, lane usage, or restrictions you must follow by law.
1
Honk to alert children
2
Slow down but pass carefully
3
Only stop if you're behind it
4
Stop in both directions
Laws require all traffic to stop when a school bus flashes red lights to protect boarding or exiting children.
1
Turn on headlights
2
Speed up
3
Honk your horn
4
Yield to traffic already inside
Traffic inside the roundabout always has the right of way; you must yield before entering the circular path.
1
Left arm bent downward
2
Left arm straight out
3
Right arm straight out
4
Left arm bent upward
A left arm bent upward at a 90-degree angle is the standard hand signal for a right turn.
1
They are slowing down or stopping
2
They are turning left
3
They want you to pass
4
They are turning right
A downward-pointing arm indicates the driver is either slowing down or preparing to stop, especially if brake lights fail.
1
To check your speed
2
To avoid hitting people or objects
3
To confirm your tire pressure
4
To look for weather changes
Looking behind helps you avoid collisions with pedestrians, pets, or obstacles that mirrors and sensors may not detect.
1
Yield
2
School zone
3
Railroad crossing
4
Stop
Triangle signs indicate 'Yield,' instructing drivers to slow down and let others go first if necessary.
1
Stop and back up
2
Make a U-turn immediately
3
Pull into the median
4
Continue and take the next exit
Missing your exit means continuing to the next one; stopping or reversing on highways is illegal and extremely dangerous.
1
Blue
2
White
3
Yellow
4
Red
Yellow warning signs alert drivers to hazards or changes in road conditions ahead like curves, crossings, or merging lanes.
1
0.1%
2
0.12%
3
0.08%
4
0.04%
Driving with a BAC of 0.08% or higher is illegal and considered impaired in most U.S. states.
1
To increase speed
2
To block others
3
To have enough time to stop
4
To honk safely
A safe distance ensures you can stop or react quickly in emergencies, reducing the chance of rear-end collisions.
1
Turning too fast
2
Parking on hills
3
Losing traction on wet roads
4
Driving without gas
Hydroplaning happens when tires lose contact with the road due to water, causing a dangerous loss of control.
1
When a vehicle is approaching within 500 feet
2
Only in cities
3
During full moons
4
While on straight roads
High beams should be dimmed when oncoming traffic is within 500 feet to prevent blinding other drivers.
1
Emergency exit
2
Yield only
3
No or not allowed
4
School zone
A red circle with a slash means something is prohibited—like no left turn or no U-turn.
1
To mark pedestrian zones
2
To help turning
3
To slow down traffic
4
To direct rainfall
Speed bumps are raised pavement sections that force drivers to slow down, especially in parking lots or residential areas.
1
Warning
2
Stop
3
Hospital
4
Speed limit
Diamond-shaped signs are always used to warn drivers about upcoming hazards, road conditions, or construction changes.
1
They reflect off fog and reduce visibility
2
They scare wildlife
3
They waste gas
4
They blind your own mirrors
High beams reflect back in fog and actually make it harder to see, while low beams work better.
1
Speed up through the intersection
2
Only stop if other cars are present
3
Ignore and continue driving
4
Stop completely, then proceed when safe
A flashing red light means you must treat it like a stop sign—come to a full stop before proceeding.
1
Yield to traffic already inside
2
Always turn right immediately
3
Stop completely every time
4
Flash your headlights to enter
Vehicles inside the roundabout have the right-of-way, so approaching drivers must yield before merging into the circle.
1
Prepare to stop completely
2
No entry allowed
3
Slow down and give right-of-way
4
Speed up to merge
A yield sign requires you to reduce speed and allow other vehicles or pedestrians to go first if needed.
1
To check your tire pressure
2
To read road signs
3
To see cars not visible in mirrors
4
To spot pedestrians only
Blind spots are areas not visible in your mirrors, and failing to check them can lead to accidents while switching lanes.
1
Only stop if children are visible
2
Honk and proceed with caution
3
Pass quickly on the left
4
Stop until the lights stop
When red lights flash on a school bus, all vehicles must stop—it means children are getting on or off.
1
Road is closed ahead
2
Stay in your lane
3
Exit only
4
You may pass
A solid white line indicates that lane changes are discouraged or prohibited, especially in areas with higher traffic or hazards.
1
Just the next car
2
One block maximum
3
About 10–15 seconds
4
Only your dashboard
Looking 10–15 seconds ahead gives you time to anticipate hazards, traffic signals, and sudden changes in road conditions.
1
Never
2
Whenever you’re late
3
To make a turn faster
4
If traffic is slow
The shoulder is for emergencies only. Using it to pass another vehicle is illegal and extremely dangerous.
1
Pull over to the right and stop
2
Turn off your engine
3
Speed up to get away
4
Block the road
Drivers must pull over and stop when an emergency vehicle approaches so it can pass safely and quickly.
1
No parking allowed
2
Services available
3
Speed warning
4
Construction zone
Blue signs are informational, often pointing to services like gas, food, rest areas, hospitals, or lodging nearby.
1
Gently pump the brakes or use ABS
2
Accelerate through the skid
3
Shift into park
4
Brake hard immediately
On slippery roads, gentle braking or letting ABS do the work helps prevent skids and keeps control.
1
Yield to oncoming traffic only
2
Reverse
3
You may turn in the direction of the arrow
4
Stop and wait
A green arrow allows protected turning in the arrow’s direction without opposing traffic.
1
Swerve off the road
2
Turn on wipers
3
Brake hard immediately
4
Grip the wheel and slow down
Stay calm, hold the wheel firmly, and gradually reduce speed while steering straight to maintain control.
1
Proceed straight only
2
You may turn safely in the direction of the arrow
3
Yield to all traffic
4
You must stop before turning
A green arrow always indicates a protected turn—you may proceed as long as it’s illuminated.
1
High beams
2
Hazard lights
3
Interior lights
4
Low beams
Low beams prevent glare and help you see better in fog; high beams reflect and reduce visibility.
1
Flashing your lights
2
Driving faster
3
Letting others go first
4
Stopping your engine
Yielding means allowing others to proceed before you, especially when merging, at roundabouts, or unmarked intersections.
1
Drivers must change lanes or slow down for stopped emergency vehicles
2
Always drive in the right lane
3
Never change lanes
4
Stop for all tow trucks
‘Move Over’ laws require drivers to give space or reduce speed near stopped emergency or service vehicles.
1
When your vehicle is stopped or disabled
2
At every red light
3
During every turn
4
While passing
Emergency flashers are for breakdowns or hazards when your car is stopped in or near traffic lanes.
1
To park temporarily
2
Only when turning left from either direction
3
To pass slow vehicles
4
To stop for emergencies
Center turn lanes are only for beginning or completing a left-hand turn—not for driving or passing.
1
Continue to the next one
2
Reverse on the highway
3
Make a U-turn immediately
4
Stop in the middle lane
It’s unsafe and illegal to reverse—just keep driving and exit at the next safe location.
1
Bridge ahead
2
Sharp change in road direction
3
No passing zone
4
Steep downhill grade
Chevron signs point in the direction of the curve and warn you to slow down for safety.
1
A dirty windshield area
2
A foggy day
3
An area you can’t see with mirrors
4
A broken headlight
Blind spots are areas your mirrors don’t show, and drivers must check over their shoulder before changing lanes.
1
Speed through
2
Ignore it
3
Stop, then proceed when safe
4
Turn left immediately
A flashing red light functions like a stop sign—you must stop completely and go only when safe.
1
Turn on hazard lights
2
Shift into neutral
3
Speed up
4
Slow down
Always reduce your speed before entering a curve to maintain traction and control of the vehicle.
1
5 and 7 o’clock
2
8 and 2 o’clock
3
9 and 3 o’clock
4
12 and 6 o’clock
The 9 and 3 position gives better control and aligns with airbag safety recommendations.
1
Speed up before others arrive
2
Treat it like a four-way stop
3
Ignore the light completely
4
Drive through cautiously
A non-working signal should be treated as a stop sign at all directions for safety.
1
Red
2
Yellow
3
White
4
Blue
Yellow warning signs are used to alert drivers of potential hazards, road changes, or conditions ahead.
1
Driving in a truck convoy
2
Using rear fog lights
3
Driving in reverse
4
Following too closely
Tailgating reduces reaction time and increases the chance of a rear-end collision in sudden braking situations.
1
Making U-turns
2
Emergency stopping and breakdowns
3
Speeding
4
Picking up passengers
Road shoulders provide a safe area for emergency stops, breakdowns, or to allow emergency vehicles to pass.
1
Prepare to stop
2
Ignore it
3
Always stop
4
Go faster
A yellow light signals that the light is about to turn red, so you should slow down and prepare to stop.
1
To slow traffic in cities
2
To mark school zones
3
To indicate a toll booth
4
To alert inattentive or drowsy drivers
Rumble strips vibrate your vehicle if you drift off the lane, helping prevent accidents from fatigue.
1
Display public art
2
Make driving more confusing
3
Provide a place to park
4
Improve traffic flow and reduce collisions
Roundabouts reduce traffic congestion and crash severity by eliminating left turns and encouraging continuous movement.
1
On rural roads without streetlights
2
During fog
3
While tailgating
4
In traffic jams
High beams are useful on dark rural roads without lighting, but must be turned off near other drivers.
1
Accelerate quickly
2
Brake hard immediately
3
Close your eyes and hope
4
Steer in the direction you want to go
Steering in the intended direction helps regain control and align your tires with the road during a skid.
1
Passing is allowed
2
No passing allowed
3
Only for emergency vehicles
4
Reserved lane for buses
A broken yellow line separates opposing traffic and allows passing when it’s safe and clear.
1
Guide
2
Regulatory
3
Information
4
Warning
Regulatory signs like stop signs enforce traffic laws and must always be followed for road safety and order.
1
Improves focus
2
Boosts energy
3
Reduces need for headlights
4
Slows reaction time and awareness
Drowsy driving impairs reaction time and decision-making, increasing the risk of accidents similar to driving under the influence.
1
Proceed with caution
2
Stop
3
Speed up
4
Yield
A red light means you must come to a full stop before entering the intersection to ensure traffic safety.
1
Five seconds
2
One second
3
Three seconds
4
Ten seconds
A three-second gap helps ensure enough space to react if the car ahead suddenly brakes or swerves.
1
Speed up quickly
2
Flash your headlights
3
Check your mirrors
4
Honk your horn
Always check your mirrors to ensure the lane is clear before making any lateral movement to avoid collisions.
1
To collect rainwater
2
To park emergency vehicles
3
To indicate crosswalks
4
To separate opposing lanes of traffic
Medians divide traffic directions and improve safety by limiting dangerous crossovers or head-on collisions.
1
12 and 6 o’clock
2
8 and 2 o’clock
3
9 and 3 o’clock
4
10 and 2 o’clock
The modern recommendation is 9 and 3 to reduce injury risk from airbags and allow better steering control.
1
Drive at full speed
2
Use headlights and reduce speed
3
Turn off all lights
4
Only use high beams
Driving at night requires lower speeds and proper lighting to compensate for reduced visibility and reaction time.
1
They must wait for traffic
2
You must stop and yield
3
Only slow down slightly
4
You can drive through
Pedestrians in a marked crosswalk always have the right-of-way, and drivers must stop until they’ve crossed safely.
1
White
2
Yellow
3
Green
4
Blue
Yellow signs warn of potential hazards or changes in the road, helping drivers stay alert and cautious.
1
Keep interior lights on
2
Drive with only parking lights
3
Use low-beam headlights
4
Use high-beam headlights
Low-beam headlights reduce glare in fog and help you see better while making your vehicle visible to others.
1
To turn on hazard lights
2
To warm up the battery
3
To communicate your intentions
4
To decorate your car
Turn signals inform other drivers and pedestrians of your next move, reducing confusion and preventing accidents.
1
Away from the curb
2
Toward the curb
3
Straight ahead
4
It doesn’t matter
Turning your wheels away from the curb prevents your car from rolling into traffic if the brakes fail.
1
U-turns are prohibited
2
You must turn right
3
You must turn left
4
U-turns are mandatory
A 'No U-Turn' sign clearly tells drivers that making a U-turn at that location is not allowed.
1
Suggested speed
2
Maximum legal speed
3
Average speed
4
Minimum speed
Speed limit signs tell drivers the highest speed allowed under ideal driving conditions on that road.
1
It helps gain traction
2
It saves tire wear
3
It can cause loss of control
4
It improves fuel efficiency
Sudden braking, turning, or accelerating can cause skidding or spinning on icy surfaces.
1
Marks a pedestrian crossing
2
Shows where to turn
3
Separates traffic lanes
4
Indicates where vehicles must stop
A stop line tells drivers where to stop before entering a crosswalk or intersection.
1 / 90
More than
Have played this quiz
Only
Are faster than you
You're faster than % of players
Just
Are smarter (for now)
You're smarter than % of players
Think you could ace the written driving test today? This quiz will challenge your knowledge of road signs, safe-driving rules, and essential traffic laws. Let’s see if you’re still smarter than a student driver behind the wheel!
About us
At Fixya, we offer an engaging and interactive way to challenge your knowledge across pop culture, entertainment, history, sports, and more.
Our trivia quizzes are crafted to entertain and educate, providing a fun learning experience that's accessible from anywhere.
With a diverse selection of topics, you're bound to discover something that sparks your interest.